1. When using, hang the sling directly into the force center of the hook, and directly hang it at the hook tip of the hook.
2. Polyester Webbing Belt manufacturer does not allow cross, twist, knot or twist in the sling used by Polyester Webbing Belt. It should be linked with the correct special sling for hoisting.
3. In the process of use, it must be directed by personnel with relevant qualifications, and overloading is strictly prohibited.
4. When two slings are in operation, hang the two slings directly into the double ditch, and hang each at the symmetrical force center position of the double hook; when four slings are used, each two slings are directly hung in the double hook. Note that the inner sling cannot be used. To produce heavy lifting and mutual extrusion, the sling should be symmetrical to the stress center of the hook.
5. When encountering loads with sharp corners and edges, the sling must be protected by means of jackets and corner protectors, so as to prolong the life of the sling used by Polyester Webbing Belt manufacturer and eliminate potential safety hazards.
Care and maintenance of slings from Polyester Webbing Belt manufacturer
1. There are no organic acid volatile substances around where nylon slings are stored;
2. It is forbidden to store the sling in a high temperature and humid environment;
3. When using nylon slings, do not soak in water or oil for a long time, avoid sun exposure or use in high temperature;
4. When moving the sling, do not drag it;
5. When it is found that the suture of the nylon sling is open, it should be sutured in time before use;
6. The slings should be hung and stored for easy access and use;
7. Metal slings should be kept away from inorganic acids and strong alkali chemicals.
Post time: Jun-25-2022